Vectorzoa

Vectorzoa/Eurocon 2007 Donates £1000 to Starlight Charity

2008-04-27T03:16:00.000-07:00

A little late, but well worth waiting for. All monies are now received from the 2007 Eurocon Charity Event Auction. Vectorzoa's Joust raised £713, and a further £45.21 from Jeroen and Martijn's items. I've added an extra £23 personal contribution which, after UK Gift Aid of 28% hits a massive £1,000! Thanks to all involved especially Mat and Pepijn for bidding high and Jon for identifying the charity in 2006.

If you wish to help the Starlight Foundation Brighten the lives of seriously and terminally ill children click here to read how and/or make a donation online.

I include the donation confirmation message below. Note the £781.25 is before Tax is credited.

Dear Mr Nicholson

Thank you very much for your donation of £781.25

On behalf of everyone at Starlight Children's Foundation, I would like to thank you for this generous gift which will be used to enhance the quality of life of our Starlight Children.

This year, Starlight will brighten the lives of over 500,000 seriously and terminally ill children by granting their wishes and by providing entertainment in hospitals and hospices throughout the UK. All Starlight’s activities are aimed at distracting children from the pain, fear and isolation caused by their illness. We are very grateful for your contribution: currently there are hundreds of seriously and terminally ill children waiting for their wish. Starlight receives neither government nor lottery funding and relies entirely on the support of people like you.

Thank you also for signing up to Gift Aid. This means that the Inland Revenue will pay an extra 28p to Starlight for every £1 donation you make. No further action is required by you.

It is only through the generosity of the public that Starlight is able to fulfil the wishes and needs of its Starlight Children. Your donation is a valued contribution towards the provision of that care and your support is very much appreciated.

Yours sincerely

Neil Swan
Chief Executive

Starlight Children's Foundation
Macmillan House
Paddington Station
London
W2 1HD

Tel: 020 7262 2881
Fax: 020 7402 7403
Web: www.starlight.org.uk

Thanks again to all. - Alex (Vectorzoa)

December Update.

2007-12-15T10:35:00.000-08:00

Hi All,

A small delay on development, nothing to worry about, just been busy with work, family and the recent frenzy of Vectrex auctions! I have some very intensive training at the beginning of January which will consume my efforts for the next few weeks but then I anticipate a light 6 weeks during which time I hope to progress and release Solar Wars. Thanks for all your support and interest in these recent months.

Happy Christmas to all Vectrexers (retro fans, and everybody else,) remember you can download your Vecvox Christmas Carols from http://vectorzoa.com/downloads.html and last years present at http://www.vectorzoa.com/pubbins/ZOAXMAS.BIN (check out the 2006 xmas blog entry.)

Cheers Alex

VecOS by Revival Studios (Eurocon demo)

2007-11-07T13:31:00.000-08:00

This post refers to VecOS by Revival Studios. It is not a Vectrozoa release, and merely reflects my own opinion formed at Eurocon. VecOS is detailed at http://www.revival-studios.com/

VecOS is a very ambitious project to produce a form GUI Operating System front end and a variety of features that one might expect from a modern OS. The key point of VecOS is that all media and components are prepared on a PC, then they are assembled together into a single giant ROM which is booted on the Vectrex. The current limitation is that everything must fit within 32K, the advantage is that data format conversions, interpretations and pre-processing can all be done easily by the PC and presented in a efficient native Vectrex binary. Naturally since its a ROM the OS is effectively Read Only in terms of it's media, but it can hold many components (including traditional GCE binaries - remember most releases were only 4K)

The demonstration contained 4 distinct sections

The GUI OS. Impressive skinned GUI, a PSP inspired look and feel was demonstrated, although Maritjn indicated Windows, etc would follow later. This was able to navigate the media elements, and launch traditional binaries.
Bitmap display. Displayed a variety of images sourced from gifs etc, apparently full screen. Clearly limited by monochrome dithering, but superb in terms of the size of images. I think we knew Martijn was the master of Vectrex Rastering!
Sound player. A surreal demo. Martijn played samples of Prodigy and Jnr-Snr tracks. Martijn was very apologetic of the quality of these tracks since they were sampled at only 3kbps however they were playing on a Vectrex! Click here for an exclusive Ed209 wav sample as produced by VecOS. It might sound a bit rough, but remember this is running on a Vectrex and produced using VecOS automated tools. (sorry but Martijn won't let me relelase the ROM itself.. yet)
VecOS BASIC. This is the shocker, not to be confused with Ken Gibbons recent and superb Vectrex BASIC which provides a full embedded Vectrex BASIC editor and interpreter benefiting from the vectrex keyboard adaptor by Richard Hutchinson. VecOS BASIC is a different animal though. You write the BASIC program on your PC in a standard text editor. The language is pretty rich and even allows standard Vectrex vector drawing commands. I read the draft manual, it was very simple to understand and even simpler to learn than old school Spectrum or BBC Micro BASIC. You then compile the BASIC on your PC for the Vectrex although it turns it into a form of bytecode, and then VecOS writes it to a ROM to run on the Vectrex. All the ease and convenience of BASIC meaning literally anyone can write for it, and the power of pre-parsed code. Martijn demonstrated Pong that he had written, the code was simple to read and understand. Very much easier than ASM but running at a good speed. VecOS BASIC also contains automatic VecVox speech translation as a bonus. It will be very exciting to see the first 3rd party VecOS BASIC development. Final thought: It was very impressive, but I wonder if Martijn has missed the Vectrex killer app here? If he could just compile it to full machine code with reasonable optimisation the speed would increase the potential even further! Maybe that will follow soon?

An amazing combination of features, which also included support for Chip8 and other obscure languages. I even heard rumour that Martijn has reverse engineered some of my Vectrex Logo for VecOS!
VecOS could be the best thing to hit Vectrex in a long time or it could be a curiosity; clearly it works hard to make the Vectrex do stuff it was never intended to do, and as a technical achievement it is already incredible. What happens will be down to us and how we receive this. Let's give it the reception, appreciation and support it needs to ensure it becomes a landmark in Vectrex development history! Great work Martijn!

Solar Wars Controls for the Pre Release

2007-11-07T13:29:00.000-08:00

(Below are brief control instructions courtesy of Mr Wenting beautifully transposed from my plain notice.)

Solar Wars Play Testing

2007-11-07T11:45:00.000-08:00

Many thanks to those who took time to play and discuss Solar Wars with me on Saturday at Eurocon 2007. In particular notable contributions came from Sijmen, Pepijn, Jeroen, Mat, John L. and John M.

There were 8 copies available for purchase. The actual game will be released in about a month or so with all game play issues changes implemented and features such as 1 player mode, superior collision detection, SFX and music added.

Points raised during play testing included:
(Likely response in italics, please comment)

The controls take some getting used to. Perhaps a tutorial or at least a reminder to put them on the overlay.
Player error e.g. overzealous mirror creation. Creating a mirror will require a large quantity of energy, this will slow down the player's creation and reduce cluttering.
Player error e.g. spurious mirror creation. It was suggested all mirrors "die" over time. I'm not sure I like the idea of them deteriorating even when not struck my the laser, as this is a key strategy point, also it would be hard to guage appropriate lifespan. A useful mirror might die to soon and a bad mirror to slowly. I propose a delete mirror feature enabled by holding B1 (select) and pressing B3 (on/off)
Mirror quotas. Currently the number of objects is capped. This is a performance constraint and might be relaxed when I optimise the code. The current number is 12 which would well enough, however this number is shared between players. One play can "hog" all the mirrors. I propose to cap each player evenly to prevent one player being denied mirrors by a greedy opponent
Extreme defensive play. It was discovered that a losing player might take a 100% defensive stance, leading to a frustrating stand off. Solution currently unclear.
The game is great fun in the middle of a battle, especially when prisms are involved, but some levels can prove plain awkward. Apply more thought and quality control to level design.
Prisms really do add an excting danger element. The splitters don't seem so great. Consider better level design for splitters or swop it for a new object.
The final furlong can prove a little unpredictable when the laser leaves the cursor area. This is already quite tight to prevent easy wins, but the line gradient can bend slightly. Check the collision detection near the cities and remove the "bend"
The prism apparently "breaks the laws of optics". (Possibly since it is an icon and therefore to represent a prism and was not intended to rotate correctly.) However to clear this up I will consult a "laser/optic geek" (his words not mine!)
To be continued...

A quick Eurocon note

2007-11-05T14:24:00.000-08:00

I'm rather pressed for time tonight, so this is a place holder for a few entries I need to write. In particular I will cover in detail what was for me the highlight of the weekend, which was Martijn's presentation of his VecOS.

I will also detail the suggestions made and conclusions drawn by Eurocon attendees who were kind enough to spend time play testing Solar Wars.

Joust Evolution Auctioned

2007-11-05T13:29:00.000-08:00

(This article in a draft pending a little more time to complete)

In a somewhat unplanned move, but inspired by the rekindled memories of the charity auction of Spike's Circus in the last Eurocon and following lengthy discussions with John Macallan (who made the physical carts) I found myself auctioning Joust Evolution for the Starlight charity which provides Games Consoles for children who are ill in hospital.

The item actually auctioned is a combination of Vectrex items which occured to me at Eurocon and are listed below: (this may change as further items come to light)

The unique sand filled transparent cased Joust Evolution Cart originally intended for CGE2007
A unique solid yet transparent cased Joust Evolution Cart used as a prototype for the above.
The binary of the final state of Joust Evolution
Miscellaneous other development Joust related binaries
The transfer of the rights to the carts, binaries and Joust Evolution itself (excluding original source code)
The promise that no Joust Classic or Evolution will ever be released by Vectorzoa in any format at any time.
The promise that the source code will never be released without express permission of the auction winner (and also at the discretion of myself)
The 5 (# TBC) Joust overlay prototypes that were produced by Madtronix
A short breakdown of the ROM binary explaining parameters and addresses of note for possible customisation by the winner.

The auction itself took place around 3pm on Sunday 04 November 2007.

An edited version is shown below. This can be removed if anyone objects to its publication.

The starting price was 50 euros.
The auctioneer is Hakan
The ebay charity reserve was quickly hit by SS at 250 euros.
We join the bidding as PB astounds the room with a bid of 800 euros!

The final winning bid was 1025 euros by Mayhem!
(this equates to 713 GBP or 1484 USD)

Confirmation of the donation will be published here when received by Starlight.
(Similarly I will also post when I receive full payment for Joust)

Note: Martijn Wenting and Jeroen Sanders were both kind enough to donate items to the same charity. This raised a further 65 euros which will also be forwarded to Starlight.

Eurocon 2007 - Game Over (1518 km later)

2007-11-05T08:20:00.000-08:00

(..that's 943 driven miles)
Just back, I notice there's lot of news already on the net, but I'll be adding my own contributions pretty soon!
Many thanks to Sandra & Sijmen for their professionalism and passion in arranging the event!

Pre Eurocon Tuning

2007-10-28T12:58:00.000-07:00

Last session before we leave. I've added a bunch of levels and realised a new feature where I choose whether or not the players can share items. It adds a whole new dimension for strategy. It's clear to me the level design is a real exciting time. I've put in about 25 for now, but I will reconsider for the final release. I also added the game over test! (So it stops when some wins.)

So this is it for Eurocon 2007!

I've sent the ROM image off to be EPROMed. (My programmer is offline at the mo.) Hopefully I've get half a dozen to demo/sell at Eurocon. This will be a pre-release, which if we consider what happened to Joust, might be well worth buying! :) Seriously I'll check out the gameplay with the Euroconners, tweak it when I get back, add the 1P mode and look to release it end of November(2007.) I've enjoyed playing it today, so I want to take the time to get it just right.

If you're in the Netherlands 2-3-4 November pop by and say "Hello!"
If you're not, then add a comment to this blog! :)

Eurocon link:
http://www.atari-shop.nl/eurocon2007.htm

Compiled code size 9,946 bytes

Twice the fun!

2007-10-27T12:51:00.000-07:00

2 days before we leave for Eurocon 2007. I've just cloned all behaviour to Player 2. So now the game actually plays! Normally this is the point where I release I've shared a variable or been lazy with my ASM labels. Fortunately it went smoothly, I guess I've learnt enough lessons from the past (especially Art of War.) This was the first time I could actually play it 2P and a few things occurred to me. I've discovered a nice game variation by limiting how far the player can move up the field. I also speeded up the energy recharge. I found a effective limit on the number of objects, I'll look at this again later, but for the moment it's capped to 12 which is plenty I think.

8K barrier passed

2007-10-23T10:38:00.000-07:00

Few more hours on Solar Wars today. I built upon the previous sessions level loader by producing a few levels, and added a level select feature. (Which forced the title screen too; below) I tried some fairly complex scenery which enabled me to encounter the accumulative error shown below (the beam on the left should bounce off the mirror.) I've improved this so it doesn't occur any more, but I'm not convinced its perfect yet, and will test further another time.

The 3 screen shots below show some aspects of game play. The left frame is the P2 laser firing into some fixed scenery, the centre frame shows the P1 laser firing into the same scenery but with a single mirror object present, and the third frame shows the orignial P2 laser bouncing on the same mirror in the same position. (Emphasising that the same mirror can be used by both players independently.)
The next session will involve fully cloning the P1 functionality onto the P2 joypad (and disabling the debug scope that shows along the bottom and is controlled by the P2 joystick at the moment.) Then some two player game testing will commence!

Compiled code size 8535 bytes

Taking it up a level

2007-10-17T10:41:00.000-07:00

Quick entry today. Found a few hours to progress Solar Wars. Nothing visual to show really so I'll describe what I added. The level loader is now present, I can write an Nx8 byte array to control the layout of each level. Clearly some levels have more objects than others hence the ragged length N. The objects that can be defined are:

Standard mirrors (placement, orientation, ownership, starting condition)
Really Big mirrors (placement, orientation, size)
Blockers (placement, orientation, size)
Splitters (placement, ownership)
Prisms (placement, ownership)

Yep, I added big (fixed) mirrors, I think this will make the levels more challenging (read dangerous) on later levels.

Now I need to sketch a few. This won't be a big deal as they are really just a few hurdles to provide variation for the players. I imagine in the 2P mode there will be favourite levels that will be played repeatedly. At the moment I'm not sure whether to allow the player free selection of the levels or to unlock them progressively like in Spike's Circus.

I've also been pondering the AI off-line. To respond to cNp's query: it always depends on the game and what heuristics the programmer can devise. The Joust AI was really easy to write, even the skill levels of the various CPU opponents and their personalities. On Solar Wars it's a little harder since there are literally more dimensions to consider. I have figured a few methods for the CPU AI, but first I'm going to finish the 2P version and study how real humans play against each other (to get a bit more variety in style.) At Eurocon I'll do some 2P play testing and then add the AI ready for the full release shortly afterwards.

Putting the game together

2007-10-01T12:11:00.000-07:00

A few more hours today, all went rather well. I'm pleased that the code let me add the odd test/branch here and there to begin shaping the game play. Today was really about behaviour and adding constraints to improve the player experience:

added energy bars to the solar emitters / players
added damage to the mirrors
added visual bars to show their status
switched the object indexing from integer to pointer based
enforced cursor switching
restricted moveable objects to those owned by each player
restricted moveable objects to those not being fried by a laser
restricted object movement to when the player has sufficient power
out of bounds collision detection for the cities
status of cities
mirror destruction
mirror spawning
All 4 buttons mapped and functioning.

The screen shot shows an energy bar for solar emitter and separately for the specific mirror at P1's cursor. Some of the P2 cities have been destroyed.

Oh, and I finally got around to moving the sun into ROM, freeing up about 100 bytes of RAM!

Next step: Designing Levels!

Smooth Times

2007-09-19T06:20:00.000-07:00

This went pretty well. You can see from the video above the laser calculations are performed over several frames. However whilst this suits the Vectrex it's not accurate since it's not observing the speed of light!

The second video shows a close up of some debug counters. From top to bottom they show, frames taken to render, vectors rendered, beams processed. The good news is that they start counting but the laser doesn't appear until the end. (which is what we wanted.) The thresholds are all parametrised and the frame rate doesn't get affected when the beams are calculated. The only offset is that the sun needs to be a little higher in the sky for the beams to fire, and I think that's a nice side effect!

It all went smoothly today, which is lucky since there were several distractions. However I've firmed the code up for B1 to select object. B2 (held) enables J1 to move an object, or when released J1X rotates it. This has taken me to a junction to ponder on the game design. (I'll keep my ideas until next time though! ;)

Game play introduction

2007-09-18T12:03:00.000-07:00

This video introduces a new concept and illustrates nicely what the sun is for! The weapons are solar powered and hence only activate when the sun is high in the respective player's hemisphere. Here we can see P1 and P2 weapons firing in turn as the sun moves. Note they are sharing components currently, but the results vary depending on the originating beam direction. Without moving components the effect would repeat so you can save bandwidth and simulate a successive "days" by hitting play again. Objects may be moved in real time independently of the turn based firing.

Incidentally the beams look very complication and only flash up for an instant. I suggest you use the blogger player pause button to examine the P1 and P2 laser configurations to see what's going on in a comfortable time frame. I will be using this object configuration to test the coding in step 2 below.

Tomorrow will be divided into 2 areas. 1) Removing the debug control mode and fixing the 1P and 2P controls. This will involve a little more design as I want to determine the features to permit a player to use. Currently my dilemma is whether to permit a free roving cursor for sabotaging enemy objects. My feeling is it will slow the pace down, we'll see what happens! The second area 2) Will be some reasonably hardcore code to spread the computation of the beam reflection calculations over multiple cycles so remove any display flicker. This will mean I need to freeze a computation status when time gets a little shy, and resume it on the next display cycle. It should be OK as I have used a lot of variables (bad me,) so saving the registers and adding a state engine should be all that's needed. Once that's in place the core engine will be complete, just needing improved collision detection (for which there will now be time if it is spread over multiple cycles) allowing me to concentrate on gameplay and making the game FUN!

Step 3 will probably be next week, which will be building the level engine so that difficulties and parameters such as object and their location may be controlled for each level.

Today's Progress

2007-09-18T11:07:00.000-07:00

A good day today, first off I wanted to clear up the cities. My cycle counter showed that to draw 6 on screen at once I really had to trim things down. I liked Cecil's but it had too many vertices, so I took some inspiration from the cities in Patriots by the eminent JD. :) They're functional, look OK and are real quick to draw!

This first photo shows the cities nicely. Flipped for the 2P. Yep, this game is designed to primarily be a two player game. I'm pretty confident there will be a nice puzzle element for the 1P game option, but that will depend upon whether the 2P style can be maintained with some cool CPU AI. Note the second laser emitter too.

The huge square is a blocker, this will be one of the features to provide variety on different levels. These will essentially be laser-proof barriers. Some will be destructible some won't. They won't often be this large, but I just wanted to check the concept. you can see the laser just dies when it hits it.
I wanted to finish off the objects so I could move more toward the game play, hence I add the Splitter. This is a simple T piece. A laser hits the T vertical and is split into 2 beams perpendicular to the incident beam. In programming terms I kill the beam and spawn 2 new ones. This reduced beam wobble and gives me a chance to align both 2nd gen beams with each other more accurately. As you can see in this second photo, whilst the beam is indeed split to 90 degrees of the incident the spitter sprite is not currently rotated. I've no doubt I'll sort that out later, but for the moment I didn't want to waste the RAM. (Still need to reclaim the RAM spent on the sun, but I'll leave that for a dull day.) I'm pretty happy with the splitter, since my code was sufficiently modular that I was able to add it in only a few lines. In fact it was so easy I thought I'd add another object just for the fun of it. I hadn't planned to use it, so we'll see how it features in the final game, but I think it looks pretty cool.

This third picture shows the extra object.. the Prism. A nice refracting effect, and I think it will greatly increase the sophistication of game play strategies.

Visual alignment is not yet perfect, but that's because I wanted to get the code working rather than the cosmetics. It's a trivial thing once I determine how I want to sort the rotation. I'm thinking I may differentiate between the prism and the splitter, by only permitting rotation on the splitter.

The final pic looks rather busy, this is showing the game concept coming together nicely. Here we can see the original laser coming up from the bottom of the pic where it strikes the splitter. It branches left and right. The left beam simply hits a mirror and collides with city #1. The right beam hits a further prism which splits the laser into 3 beams. Nicely clipping cities #2 and #3. This would be a good result if it were being played for real here.

Normal services resumes..(shortly)

2007-09-15T02:14:00.000-07:00

Hi Guys,

Sorry for the pause in updates, you haven't missed anything, I've just been a little busy with my day job! :) There are scheduled coding days Tuesday and Wednesday this week, so you should be spoilt for updates! :)

Meanwhile here's a submission of a city graphic from Cecil C. inspired by Missile Command. (Thanks Cecil, all submissions are much appreciated and will always be shown in this blog.) I'll be exploring the options on this one, but the number of vertexes is still an issue since there will be 6 on screen simultaneously.

Pitcher's Duel

2007-08-29T12:20:00.000-07:00

Just a quick video clip in case anyone's curious.
I wouldn't dare review it since I'm British and therefore know nothing of Baseball. :p

Note this is not a Vectorzoa game-
Just a clip of the recently released Pitcher's Duel title launched at CGE2007.

Quick update

2007-08-28T06:39:00.000-07:00

Hi folks, No updates in while, been a combination of work commitments and holiday over the last few weeks, and then finally this weekend just as I was limbering up for a Vectrex day.. serious back probs! :( Hopefully be back in the saddle for next weekend. The Eurocon release is in no danger.

Meanwhile though, my Pitcher's Duel finally arrived. Thank's to Sean for the black one and (a no doubt reluctant) Mayhem for my greenie! ;)

P.S. Looks like Blogger are now supporting movies, so expect some clips as things develop.

Day 7 - Improving Presentation

2007-08-02T14:47:00.000-07:00

A productive session. Firstly as promised I improved the collision detection. The 3 frame pic above shows: (note the blazing sun!)

how bad it was
overzealous detection
just right

I added the parabolic reflector, I think it looks pretty cool. Note also how I have removed the collision clash zone boxes as I thought they were offending the eye. Of the two bars at the bottom the higher one shows "how hard" the Vectrex is working, clearly a good sign that we appear to be on about 60% remaining output at the moment

This final pic shows again the laser emitter and also three cities at the bottom, these will be Player One's lives. I'm not entirely happy with these at the moment so if anyone wants to offer a Vector sketch of a "missile command style" city then feel free to email me. I'm looking for something of less than 24 lines, preferably that can be drawn without taking your pen from the paper. :)

As you can see the cities have taken a fair bit of processing cycle to draw. (We're down to about 40% remaining.) I'll need to keep my eye on them.

Compiled code size 5785 bytes

Orbit

2007-07-31T15:57:00.001-07:00

UPDATED. New Blogger hosted movie of the Solar Wars sun orbiting.

Thanks Blogger! ;)

Modern or Classical Styling?

2007-07-29T03:33:00.001-07:00

As you can see the graphics are coming along nicely! Well actually these aren't real screen shots (suprise!) but on the left is a real life solar power station in Spain, and on the right a standard radio telescope. I need a giant solar reflector to emit my game lasers, so I think I might use one of these as the basis. Clearly it will be in vectors, and therefore very rudimentary, so whilst I prefer the image on the left the one on the right might be more recognisable (and more animation compatible.) Please leave a comment to vote for the left or right images or suggest any other images/concepts that I can consider.

Day 6 - Sunrise!

2007-07-29T03:20:00.001-07:00

It's been longer than I'd prefer, but I just grabbed another hour on the Vectrex. If you recall the next step was to add multiple lasers. Thankfully everything was implemented in structures, so I just added list wrappers around the structures and all seems in order. The pic shows two parallel lasers. I need to check out the memory constraints and extend the segment lengths, but I'm hoping we'll be good for up to 12 ideally. (Day time pics get background reflections, so I've blacked parts out to avoid distraction.)

Now it's time to start adding some context and game play. I tend to find sprites help with this, so it's time to do a little drawing. Since the game is called Solar Wars what better start than the sun! Of course this is a Vectrex so Vectors are the order of the day. It's not easy shading with Vectors, so I had to be a little cunning. I had thought I would need a lot of frames for this, but it turned out only 4 gave a nice effect. Bonus! Currently the sun in rendered in RAM, but when I have a moment, I'll run the data through my PC to get the ROM trails (to conserve precious RAM)
You can see the cycle line and the 033 look positively dull in comparison to the Sun! Oh by the way the sun also orbits the screen, but for this photo I froze it. Maybe I'll take a pic or two tonight when it's darker, and easier to take the shots.

At the last moment I think I discovered a bug with the second laser collision detection, so maybe it's time to evolve the CD a little more. I'll improve the resolution and iron out any bugs in that area.

Day 5 - 2 mins very well spent!

2007-07-21T10:21:00.000-07:00

Yes!!! Cooking on gas today! Literally spent 2 mins on this, (spent more time on the photos!) Even better I saved a byte on storage. As you can see the dark matter has cleared off and the beams travel as intended. The left pic shows a beam entering from top right, hits reflectors (numbered spiralling clockwise inward from bottom left) 4,3,2,1,4 in turn. (and yes I like using the same reflector twice.) Pic on the right is a little more complex. Beam hits (4,3,2,4,1,3,) Nice. (OK, I admit I'm chuffed! From now on we should be set. Not sure when I'll do the finer collision detection, it's no biggie. Next step will either be some sprites or a second beam. Have to see what mood I'm in. I doubt it will be long until my next session. (Thanks to J.K. Rowling's latest cash cow.)

And the hero of the day is the small dot you see in the top right of the second pic. This enabled me to realise what the bug was. It shows the screen edge detection was correct all along. (Drowning man, at the time.) So armed with this knowledge I was able to see I was only plotting the total number of segments that the last reflection required to hit the edge of the screen. Muppet! Thankfully a problem identified is a problem solved.

Actually I did spend more than 2 mins, I spent another few mins adding the ability to move each reflector. Remember we had selection and rotation in Day 4, so I added moving if B3 is held down and J1 tweaked. Beam direction has now shifted to J2.

Snuck a new pic in.. (Dark with ISO400)

Compiled code size 5266 bytes

Day 4 - Is the earth flat or doughnut shaped?

2007-07-20T14:57:00.000-07:00

A few hours this evening. Nice to be back in 8 bit land. No interlude yet, it was a busy week at work with little time for side interests, so tonight's work was spent on the main game. You may remember Day 3 was a bit of a mess, so I rewound a little and added got things working a lot more simply this time. I'm still using the coarse collision detection as that's just tidying up which we can save until later. For the moment it's all about getting a 2nd generation reflection.. (beam enters facing left from top right.)

Success! ..But.. I get multiple reflections now, but strangely the beam stops prematurely. I have code to determine when the beam hits the edge of the screen, but somehow it also seems to hit something at other times. Either I've discover a dark matter detector, my world is a torus, or there's a mysterious bug in my code. I suspect the latter at the moment, but I'll update you. Most evidence seems to suggest it's when I cross the centre axis, i.e. as my "sign" changes. I'm using an ADDD with a BVS check which I need to ponder on whether it's the right choice. Usually naughtiness when you start bending signed and unsigned usage and checks (tut.) No doubt the solution will dawn on me shortly. Once this beam reliably hits the edge of the screen (or a consumer) I'll be moving on to improving the object handling. Oh that reminds me, you might have noticed a change to the layout. I added a 4th object (all 4 are now reflectors.) I removed the auto spin feature of the 2nd object and added an object select feature to allow me to rotate the reflectors independently for debugging (or maybe a more lasting reason..) You'll also note that one of the boxes appears brighter, this indicates which is selected for rotation (cycled with B1 & B2.)

Compiled code size 5182 bytes

Day 3 - A Stolen Moment

2007-07-15T13:43:00.000-07:00

Hmm, a 45 spare mins so I thought I'd do a little Vectrexing. It's never a good idea to spend a short period on the Vectrex IMHO, it takes a while to remember where I'm at and if I rush it, then I tend to go in the wrong direction. I'd say lesson learnt, but maybe this blog will record otherwise! Anyway at least it was fun. My pics tonight simply show some bugs, (one rather spectacular) resulting from tonight's dabbling. I have the concept of a Beam, having many segments, and many child beams. Segments in turn have many invisible test segments, but that's not important here (yet). Tonight I got a little carried away and created a new child for each reflection. I think on reflection (no pun intended, honest) that this might be unnecessary. I need to keep track of by absolute and relative positions, and my local origin. I think this might be better achieved using temporary variables and keeping the number of child beams to a minimum. If I use too many child beams, then it kinda defeats the object and it will both increase the memory I use and reduce the drawing speed when I choose to render the segments of each beam.

This pic is why I Vectrex.

So my next step will be to revisit my code between Day 2 and Day 3, and replicate the functionality whilst keeping my child beams to a minimum. I figure with the nature of my plots, I can aim for about 10 segments (possibly including 4 reflections before I need consider a beam will be "full" and a new child will be forced. This permits Vectrex Beam recalibration and will reduce wobble. Check out this second pic. I grabbed the camera as quick as I could as the screen was frying! You never get bugs so beautifully illustrated on any other games console! (and this is with a very low brightness setting and beam insensity set to $3F; about 25%.)

Not sure when the next session will be, as there may be an interlude as I try a new idea I've (just) had. I'll document that as I do it too, although I am sure I'll be back to continue this project within 7 days.

Day 2

2007-07-09T21:20:00.000-07:00

Another day, and so soon, I'm blessed!
Last time I promised a little more visual output and the day has delivered. Still just over-engineered lines at this point, but much progress.
Today I was reminded of the triangle of Vectrex programming:

ROM Vs RAM Vs CPU (Speed)

You can pretty much do things in an infinite number of ways, but the quest is always to find the balance. Today my trig tables were in ROM, my rotated co-ordinates were in RAM and CPU did fairly well out of the deal (although I did a lot of 16 bit arithmetic rather than 8bit.)

So here's some photos of the day's progress:

First off, I was pretty comfy with the line we had on day one, so I wanted to introduce some obstacles. These boxes surround enlarged lines (my simple obstacles) The boxes are just for reference and will disappear later. The lines are also drawn at the navigation scale rather than the efficient fine detail scale they will eventually be drawn at. But they look nice and the geometry works for angle angle in vegrees.

Next a rather clumsy attempt at lo-res collision detection. I spent a little bit too much time on this, and eventually I decided that this method was too processor intensive and not accurate enough. Coarse collision detection is great, but it should never be less than generous!

Also if you look closely you will see the long line is in fact made of 3 shorter ones, this is because I wanted to draw them at a reasonable scale as very long lines can take an age to draw on the vectrex and look blurry. This way, I can keep sharpness without too much compromise. Each line is also sampled about 20 times en route to ensure it doesn't hit anything or fall off the screen. If a line matures to full length then it is drawn and the fractional checking disappears.

This shows a zoom on the second pass collision detection. The box is now very small, less than 1cm. The dot can be steered (for debug purposes) into the hi-res collision rectangle. When it "collides" the dot blinks (the photo won't show that! :) The blured effect is because the line is rotating at about 0.5Hz to test all collision eventualities. I had a little fuss making sure my bottom left didn't become my top right, but eventually I sorted that out. :)
I'm not using this hi-res rectangular collision detection yet, but I will as a second pass. The dots that trace the line we saw on day one, will be used as a third pass collision and will provide extremely accurate collision detection (CD) to make sure everything looks nice.

The final fruits of the day! An incident beam matching a very coarse collision detection and "bouncing" off at the correct angle. Not using the finer CD as mentioned, and note the box for debug purposes, in shows nicely why the CD thinks a collision has occurred. The beam and the obstacle may both be rotated on the joystick for debugging. I'm pleased with this solution, currently it looks very simple, but the engine under the hood will scale considerably (at least that's the intent.) I notice with a grimace that if the reflection strikes a second obstacle the Vectrex hangs; something for another day, but I'm confident it will be a minor tweak. After all the prep on the straight lines the bouncing angle was only 4 additional lines of code which fitted in nicely.

Compiled code size 5000 bytes

(Happens to be a round number by fluke! Note this is already 20% bigger than Star Sling's 4096 bytes, I guess you can see how the each of the 3 resources complete (ROM/RAM/CPU) Star Sling was imperative to be a fun, two player game with analogue controls that fitted in 4096 bytes. This game I will allow to go to the full 32K if necessary, but I will stick the the standard 880 bytes of RAM. At the moment, I suspect the constraint of this game will be the CPU, there are a lot of calculations to do depending on player events, so managing that will be interesting.)

Start coding!

2007-07-06T20:36:00.000-07:00

Right, enough theory let's get typing! I've set up my trig tables for later and confirmed the algorithm for the bouncing light. Now I need to tie it together in Vectrex speak! As I said before this can be tricky since even simple maths can get tough without fractions or dividing..

However, setting an angle and drawing a vector is trivial, so that happened very quickly and was more a question of remembering my compiler flags! The line was simple, but as is often the case the collision detection might prove tricky. What I needed to do was to draw a line, but to know exactly where each point was along that line. So I did a lot more maths to determine how to work out each 'y' for each 'x', generally its easy to trot along the hypotenuse but a little more effort to pop along a single axis. Anyway I got that in place and now you can see a very unimpressive line with some dots next to it. (What you can't see is the line rotated when the joystick is moved. Also the dots are deliberately shifted to to the right so the are clearly visible, yet still aligned.) These are drawn to show I "know" each dot along the line. In a later version I may go back to my sin/cos pairs but in this example I tried the slightly more tricky tan based method in case I need it later. (As I type this the sin/cos seems to fit the requirement once, more.. I guess we'll see over time.)

This is one of the things about Vectrex coding, some things are really easy and some things are more challenging and there is often a fine line between the two. In this case I was really pleased with my dots, even though they won't be seen in the final game and are just for behind the scenes calculations. Any also they look inferior to a line which is easy to draw! :)

Not sure when my next chance to code will be (hopefully soon), but I'm sure there will be a lot more visual results at that time, since must of the planning (for this stage) is now done.

Compiled code size 3814bytes

Day 1 - Power up!

2007-07-06T18:32:00.000-07:00

Having been away from Vectrex for 8 months, I thought it might be time to fire up the little beast and see what happens. So this morning I cleared my computer room, plugged in my Vectrex dev PC, rewired everything up and crossed my fingers. I ran into a few difficulties first this setup was much less elaborate than last years arrangement, for one I was only planning on using 1 monitor. In an amazingly inconvenient turn the EPROM simulaor software insisted on only "displaying" on the second monitor position, (which wasn't present any more) no amount of display setup config would stop it whizzing off the start bar and out of the screen! Eventually I managed to find the keyboard shortcut to move a window without the mouse. Alt-space, down, enter (eventually.) Not a pleasant start! Second problem was the EPROM simulator wasn't recognised by the vectrex, just constant Minestorm! Thankfully this was easily solved, I unplugged the sim and plugged my second one in instead. I'm assuming it was just a bad combination of Vectrex and cart edge, hopefully all these snags are behind me now!

More prep

2007-07-06T17:32:00.000-07:00

OK, I've done some sketches and I've figured out how I want things to work and the math(s) behind it. Now the hard bit is to bend the math so that it fits Vectrex hardware. I guess I should point out what makes things tricky.
1 No floating point numbers (no fractions or numbers between 0 and 1)
2 No trigonometric functions
3 No divide! (although you can write your own)

My solutions.
1 I use two bytes for my numbers, I guess you could call them the ones and 1/256s columns (as opposed to 1s and 0.1s). I have my own routines that deal with signing, adding and multiplying these numbers. Multiplying fractions it especially useful when we get to (2)
2 I use pre-calculated lookup tables (normally produced in MS Excel) these lookups map angles in Vegrees (256 vegrees in a circle) to my byte fractions in 1/256s
3 Simple integer division I do manually with subtraction. Non integer division I try to avoid or multiply by reciprocals.

Since I use lookups for my trig I need to decide which ones to use. Normally Sin and Cos are all I need, and these tend to be in 2 bytes form. SSSS used only a 1 byte Arctan table. I figure the new game will need Sin, Cos and Tan. So I add to my existing Sin and Cos tables using Excel spreadsheet exported as CSV.

I figure it's about time I powered up the Vectrex to start coding!

Low tech and high tech

2007-07-06T13:00:00.000-07:00

Remember I've still not gone near my Vectrex yet, and there's more yet to come before I do! I bet this one will comes as a shock.. I need to test the basic maths behind my game, it with involve reflection and as every schoolboy knows with regards to a reflection "the angle of incidence = the angle of reflection" - but I wasn't sure what this meant with regards to the maths in practice..

A few more scribbles and I had a theory, basically I wanted to know it terms of "absolute angles" (compass bearings) what angle a reflection came off at. My pen and paper scribbling came up with
r=2s-b
(where r is the angle of reflection, s is the reflective surface angle and b is the incident beam angle.) I thought it was right but wanted to test it. It's times like this I yearn for the convenient simplicity of an 8-bit microcomputer with integrated BASIC and simple video display commands, like a BBC Micro, sadly times have moved so I reached for the 2007 equivalent.. C# on the Xbox 360! :)

Actually the 360 this is a mixed blessing, for all the time I save with native floating point and trig support, I lose again turning off all the fancy 3D and the textures etc! Anyway about an hour later I had my test (I know an hour's a long time, but C# and the 360 are all new to me!) I took a photo or two:

The red beam is incident, the pink is reflection and the yellow is the reflective surface. The joystick spins the reflective surface and confirms my math to be correct.. I'm ready for the next step..

The ground work..

2007-07-05T10:01:00.000-07:00

I've had an idea for a new game, I won't give all the details yet, you'll just have to see it evolve from my efforts here. So like most Vectrex projects it began with a pad and paper and a lot of thinking! I always try to consider the technical demands of the core engine in advance. Bells and whistles can come later, so its normally trying to get some maths working, and more often than not some trigonometry..

A new vectrex game - blogged!

2007-07-05T05:39:00.000-07:00

As stated below, I've decided to write a new game for launch at Eurocon 2007, and for the first time I'm going to write a blog of the experience! I hope you'll enjoy this, if you do, please drop me a comment! I'm happy answer any questions posed as comments , they make even shape the game! l do reserve the right to "tease" you a little on the overall game design since it will be revealed incrementally as the game takes shape..

You're about to see the whole development process from Vectorzoa's perspective. It may not be the definitive way to write a game, but it's my way. (Remember I do have a day job, so this game is written in stolen moments.)

Here goes...

Good News!

2007-06-29T14:15:00.001-07:00

After hanging up my controller at the end of 2006, I am pleased to announce I am back in the saddle. Vectorzoa will release a game for Eurocon 2007. (Due to copyright fears it is unlikely to be Joust Evolution.) More details when I decide on a plan. :)

Happy Christmas!

2006-12-17T06:21:00.000-08:00

Click here to download your FREE Vectrex Vectorzoa Christmas Present!
Can be used with ParaJVE, Mess or better yet a REAL Vectrex with VecFlash or an EPROM. This ROM is free for personal use. Multicart inclusion is exclusive to Madtronix.com

Check out additional game information and downloads at the main vectorzoa.com website

Vec Keyboard Lives!

2006-11-14T03:15:00.000-08:00

Originally conceived, designed, prototyped and coded by Dan Siewers
Redesigned for PCB production by Richard Hutchinson

Impressive work, guys!

The last time text was used to any degree was on the Luscher Stress Tester.

Will the keyboard be the dawn of a new era of programming and adventure games or fall the way of the lightpen? You decide! With extra RAM carts a BASIC interpreter has become a real option.

Eurocon 2006 Charity Mayhem

2006-10-30T12:04:00.000-08:00

Take a dozen hardcore retro gamers, a one off unlocked Spike's Circus and a unique Gold (coloured) engraved Vectorzoa Spike's Circus tag, the mighty Pepijn as enthusiatic auctioneer (shown) and a very deserving charity to benefit and you get a receipe for genorosity.

With a starting price of £30 and a great crowd, the bidding got pretty intense, when the bidding hit £200 we were all getting pretty scared so a few odd carts, a lightpen and slimcards were thrown in to try to distract us all from the pressure. Undetered the UK's own collector and gamer extraordinaire- Mayhem went on to win the auction with a very impressive and genorous bid of £300! Many thanks to Mat for his terrific contribution which will combine with other auction items and contributuions to go to The Starlight Charity which provides amongst other things games consoles to help grant children's wishes and entertain children in hospital.

If you would like to help Mat please click on the link here and make a donation.

Where are you?

2006-09-27T08:10:00.000-07:00

Calling Vectrex owners, please support Joerg's Vectrex initiative on http://www.frappr.com/everythingvectrex

Spike's Circus rolls into Sheffield

2006-09-27T08:00:00.000-07:00

A big thankyou to Richard Hutchinson for his super cool engraved Spike's Circus key fobs which just arrived in the mail. The pink one lasted about 4 seconds before being grabbed by Vectorzoa's "GCE repro box designer" Kirsty! Check out www.vectrex.biz for Richard's cool Vectrex and Atari related hardware.

Eurocon 2006

2006-09-02T02:36:00.000-07:00

I (Alex) will be attending Eurocon 2006 representing Vectorzoa and am very much looking forward to meeting some more of the Retro Community, living in the South-west leaves me far from the Vectrex action so it will be good to say hello to my more Northern based UK friends, (and the remaining Europeans I did not meet at RGD 2006 in Holland!) My priorities will be social and I do not expect to bring many items to sell, although I will bring a few.

Regarding Joust Evolution there have been statements on other sites and here that it will be released at the show; I would like to revise/clarify this: Joust Evolution will be launched at the show in some form. I would expect one of the following:

Joust (Classic) only will be made available in very limited numbers. Probaby a production of less than 16 in total, the majority will be offered to Eurocon attendees as priority at a fixed (and very reasonable) price and the remainder put out to ebay auction following.
Failing that (due to baby etc.) Joust Evolution in its current form will be demoed (Vectrex console availability permitting.)

Joust Evolution the full release will follow afterwards, hopefully within late 2006. It is important for me to include original concepts in my games and I do not want to rush the Evolution components of the game. I hope upon release you will all agree it was worth the wait! Joust Evolution will be released in my usual production run of circa #80 Limited Editions.

Vectorzoa gains a new team member!

2006-08-29T10:13:00.000-07:00

On Sunday 27th August 2006 at 9:15pm our beautiful baby Eleanor Rose entered the world. This photo was taken within 10 minutes of her birth. Mother and baby are both well and have safely returned home.
[With such tiny hands PCB soldering should be a breeze for her, and another beta tester is always welcome!]

Joust Evolution Screenshots

2006-08-25T16:28:00.000-07:00

Having produced a test overlay Vectorzoa can now reveal screen shots from Vectrex Joust Evolution. By visiting the main site vectorzoa.com check out the raster platforms and flickering flames and vector mounts, eggs and remaining details. Remember this game is Joust Evolution, at this point only the Joust Classic features are shown.

Please show your support of Vectorzoa activites by leaving your comments in this blog!

Spike's Circus 2 - In Development!

2006-08-25T04:15:00.000-07:00

Following the excellent reception of Spike's Circus (Classic Edition still available) and the clear demand for skill based games that are really fun to play Vectorzoa is proud to announce the title and concept of the sequel:

Spike's Circus 2 : Spud Bounces Back

This game will feature similar concepts, but this time starring Spud (as the anti-hero!) The quintessential element of the game will be Spud riding a Pogo Stick! The pogo stick adds new complexities of control and challenges including bounce synchronisation and leaping over objects! SC2 is currently in design but further details and screenshots will be published soon.

Spike's Circus Completion Competition #2

2006-08-20T05:02:00.000-07:00

To give international buyers an opportunity to compete for a free copy of Joust Evolution. Vectorzoa has offered Joust Evolution #04 as a prize in a second competition. All Spike's Circus Limited Edition owners were invited to submit the unlock codes of the final level before 9pm on Friday 18th August 2006. There were two entrants:

Robert Stickles
Pepijn Bakker

According to contest rules the winner of JE#04 was to be decided by random selection.

After validating submissions, a suitable random probability visual indicator endorsed by Her Majesty Queen Elizabeth II was selected from a convienient mobile personal appareil pouch. The candidates were designated a respective facet, the instrument was then launched along a freefall parabola orthoganol to the natural plane. Following the subsequent collision with the plane and the eventual assertion of a stable equilibrium the victor was found to be the latter of the aformentioned identities.

Or to put it another way..

Pepijn won the coin toss.

Congratulations, you win the forthcoming Joust Evolution LE #04

Spike's Circus Completion Competition #1

2006-08-20T04:44:00.000-07:00

The first person in the world to complete Spike's Circus is confirmed to be: Mike Cottrell! Mike (Tyke) wins #03 of the forthcoming Joust Evolution!

22222

2006-08-17T15:24:00.000-07:00

Spike's Circus is game number 2 from Vectorzoa stable. (if you're a programmer that is, since programmers always count from 0! (See the Limited Edition Serial numbers for proof.) Logo was game 0, Star Sling was 1. As Vectrex collectors may be aware Star Sling was especially written to fit within the size of ROM that programmers had to use back in 1982. This size used was exactly 4KB or 4096 bytes. Most original GCE games were 4K with a few stretching to the extravagance of 8K. The Vectrex can address a maximum of 32K of on cart memory. Thanks to clever work by John Macallan this can be spilt between extra ROM and RAM. Spikes Circus uses 8K of onboard RAM, (the rotated clubs are pre-rendered to the RAM on boot, the side view of Spike's Unicycle is rendered in real time, and the top down view of the cycle on the tightrope is pre-loaded into ROM). The rest of the RAM is used to quickly access level gradients and heights for convenience. This leaves 24KB of potential ROM space to use for the game. Spike's Circus uses exactly 22,222bytes without any contrivance or artificial padding in the source code. Why 22,222? Well because it's game number 2 of course! :)

Joust Evolution

2006-08-09T11:34:00.000-07:00

Vectorzoa is proud to reveal the Mystery game to be Joust Evolution.
JE will feature the classic game with additional mounts and styles of movement radiacally affecting strategy.

A teaser shot is shown here. The ledge is NOT part of the overlay but is raster generated. The Joust mount is of course Vector generated. JE is the first game to effectively combine Rasters and Vectors to any significant degree, benefitting from the strengths of each. The animated flame pits are another great example of this.

Vectrex Mystery Game

2006-06-01T12:09:00.000-07:00

It is intended this will launch at Eurocon 2006.
Currently few details have been released although it is known to be based upon an enhanced version of a popular Retro game and to involve both Rasters and Vectors to their best effect.

Vectrex Spike's Circus

2006-06-01T12:07:00.000-07:00

Spike's Circus shipped on 9th August 2006

See http://vectorzoa.com/circus/gi_circus.html for details.

Further announcements will appear here..
Spike's Circus will see the launch of my new boxes... Vectrex Clearbox!
These are modern, stylish (and indestructible)

New animated gifs added to site. (25/06/07) Check them out!
Also level one intro screen shown here:
http://vectorzoa.com/circus/i/level1.gif

New packaging and overlay details added too.

Overlays are the highest quality ever produced for a Vectorzoa game! Super vibrant colours and extra thick!

Alternative presentation clearbox posted on ebay featuring reproduction GCE facade.

Vectrex Star Sling

2006-05-15T09:58:00.000-07:00

SS LE 25 boxes and overlays production completed.
All ordered SS LE have now shipped!
1 remains for ebay sales.

SS FE now emailed to those who requested it from on the Vectorzoa website:
http://vectorzoa.com/ssling/gi_ssling.html

SS TE ( 11.49 EUR) taking orders on:
http://www.madtronix.com/html/star_sling.html

Vectrex Logo

2006-05-14T11:16:00.000-07:00

Logo LE now sold out.
Final copies reserved but still unpaid currently being auctioned on ebay.